Xiaomi Electric Scooter Error code List:
Xiaomi electric scooters emit long beeps followed by a series of short beeps to indicate an error code.
Error Code [Beeps] | Error |
1 Long 0 Short | Communication with the panel is anomalous |
1 Long 1 Short | Phase A of the motor current is abnormal |
1 Long 2 Short | Phase B of the motor current is abnormal |
1 Long 3 Short | Phase C of the motor current is abnormal |
1 Long 4 Short | Acceleration sensor reading is abnormal |
1 Long 5 Short | Brake sensor read is abnormal |
1 Long 8 Short | Motor sensor read is abnormal |
2 Long 1 Short | Communication error with the BMS |
2 Long 2 Short | Bad BMS password |
2 Long 3 Short | Serial number of the anomalous BMS |
2 Long 4 Short | Abnormal system voltage |
2 Long 6 Short | Save operation in the Flash memory is wrong, please check the controller |
2 Long 7 Short | Bad controller password |
2 Long 8 Short | Some state of the MOSFET is anomalous |
2 Long 9 Short | Low status of the MOSFET is anomalous |
3 Long 1 Short | Program jump error |
3 Long 5 Short | Serial number of the scooter is wrong |
3 Long 9 Short | Temperature of the battery sensor is abnormal |
4 Long 0 Short | Sensor temperature of the controller is abnormal |
Segway Ninebot Electric Scooter Error Code List:
Segway Ninebot electric scooters indicate the error codes on the dash
Error Code [Visible On Dash]
| Error |
10 | Dashboard and controller communication issue |
11 | Phase A of motor abnormal |
12 | Phase B of motor abnormal |
13 | Phase C of motor abnormal |
14 | Throttle hall abnormal |
15 | Brake hall abnormal |
16 | Battery change MOS abnormal |
17 | External battery change MOS abnormal |
18 | Motor hall abnormal |
19 | Battery voltage abnormal |
20 | External battery voltage abnormal |
21 | Battery communication failed |
22 | Battery code failed |
23 | Battery default serial number |
24 | System voltage test abnormal |
26 | Flash saving error |
27 | Control code error |
28 | Motor driver mos up-bridge short circuit |
29 | Motor driver mos down-bridge |
31 | Program skip error |
35 | Unit has default serial number |
39 | Battery temperature abnormal |
40 | Control board temperature abnormal |
41 | External battery temperature abnormal |
42 | External battery communication error |
43 | External battery code error |
44 | External has default serial number |
45 | Internal BMS deep cell discharge |
46 | External BMS deep cell discharge |
47 | Internal BMS communication error |
48 | External BMS communication error |
49 | Internal BMS flash mismatch |
50 | External BMS firmware flash mismatch |
Kugoo Electric Scooter Error Code List:
TF-100
The Kugoo M4 and M4 Pro electric scooter error codes appear on the LCD display with a warning sign. Kugoo’s changes it’s controllers for their electric scooters regularly so error codes may change along with them.
Error Code [Visible On LCD Display]
| Error |
0 | Normal status |
1 | Motor fault |
2 | Throttle fault |
3 | Controller fault |
4 | Brake lever fault |
5 | Undervoltage protection |
6 | Comms display to controller fault (sometimes error 8 is sensors on motor) |
7 | Comms controller to display fault |
Zero Electric Scooter Error Code List:
Zero electric scooter error codes appear on the LCD display with a warning sign.
Error Code [Visible On LCD Display]
| Error |
0 | Normal status |
1 | Potential meter issue |
2 | Brake issue |
3 | PAS sense hitch |
6 | Battery undervoltage |
7 | Motor fault |
8 | Throttle Fault |
9 | Controller fault |
10 | Communication receiving issue between dash and controller |
11 | Communication transmission issue between controller and dash |
12 | BMS communication failure |
VSETT Electric Scooter Error Code List:
VSETT electric scooter error codes appear on the LCD display with a warning sign.
Error Code [Visible On LCD Display]
| Error |
0 | Normal status |
1 | Potential meter issue |
2 | Brake issue |
3 | PAS sense hitch |
6 | Battery undervoltage |
7 | Motor fault |
8 | Throttle Fault |
9 | Controller fault |
10 | Communication receiving issue between dash and controller |
11 | Communication transmission issue between controller and dash |
12 | BMS communication failure |
